aaronsworld.com

A place to share my experiences

3D Printing

A small and simple 9g servo mount for mounting directly onto the extruder carriage for use with the auto bed levelling function. Mine is mounted onto a Greg’s Wade extruder body but would probably be compatible with more setups as it requires only an M4 mounting hole Source: Simple Servo [...]

Simple Servo mount

February 5, 2016 in 3D Printing by aaron

This was intended for use on a quad-rotor project, although it can be mounted on really anything. I used two Hitec HS-55 sub-micro servos and it whips the camera around without any problem. Enjoy! If you like this project, or would like to know more about 3D printing, check out [...]

Super Compact Pan Tilt Camera

February 5, 2016 in 3D Printing by aaron

This is my simple diversity receiver support. It fits on a 8mm rod. I have placed it on a old tent stick 🙂 Please hit like if you like it. Enjoy Stanley Source: FPV Diversity Receiver Support by Stanleykuenzle

FPV Diversity Receiver Support

February 5, 2016 in 3D Printing / drones by aaron

A foldable sunshield for the Samsung Galaxy Tab 4 7″ Tablet. Best results with PLA 20% infill, no support needed, cooling fan recommended. Source: Foldable sunshield for Samsung Galaxy Tab 4 7″ Tablet for DJI and other FPV by TheFlyingSentinel

Foldable sunshield for Samsung Galaxy Tab 4 7″ Tablet for ...

February 5, 2016 in 3D Printing / drones by aaron

I included 3 different versions. The first one fits the Garmin gtu 10. The other two are for the TK 102 tracker. I have not tested this with the tk 102, I made it using the measurements I found online. The reason for the different tk 102 files is that [...]

DJI Phantom 2 gps holder by GarrisonTECH

February 4, 2016 in 3D Printing / drones by aaron

Is just a protector for the cam of the quadcopter. Other designs didn’t suit my needs, so I redesigned it. I make it also parametrizable so that it can be adjusted to yours. Just edit the Open Scad source file and modify accordingly. Source: Dji Phantom 2 vision & cam [...]

Dji Phantom 2 vision & cam protector by 3dbychance

February 4, 2016 in 3D Printing / drones by aaron

Keep safe your DJI Phantom camera and gimbal! “Avoid crashes in stony lands, protect your hardware from falls. Just print this protective plate, and escape from a tragic fate.” Source: Protective plate for DJI PHANTOM by Nueve3D

Protective plate for DJI PHANTOM by Nueve3D

February 4, 2016 in 3D Printing / drones by aaron

I made this for a customer to use his TS58500 mini 5.8GHz FPV video transmitter with his Phantom 2 (with Zenmuse 3D Gimbal). Note: You will need to make a wire to connect the video transmitter correctly (not shown). If you are not expert with these things get help. My [...]

DJI Phantom 2 P330Z FPV mount by geekaz01d

February 4, 2016 in 3D Printing / drones by aaron

Gimbal Protector for Phantom 2 H4-3D Source: Dji Phantom 2 H4-3D Protector by Plastikbanscher

Dji Phantom 2 H4-3D Protector by Plastikbanscher

February 4, 2016 in 3D Printing / drones by aaron

Source: Printrbot Talk Forum • View topic – New Hot End Suggestions?

Printrbot Talk Forum – New Hot End Suggestions?

February 3, 2016 in 3D Printing / Tech by aaron

Source: This Old Spoon: E3D v6 Hotend on a Printrbot Simple Metal (Introduction)

E3D v6 Hotend on a Printrbot Simple Metal (Introduction)

February 3, 2016 in 3D Printing / Tech by aaron