aaronsworld.com

A place to share my experiences

Yearly Archives: 2016

I made this for a customer to use his TS58500 mini 5.8GHz FPV video transmitter with his Phantom 2 (with Zenmuse 3D Gimbal). Note: You will need to make a wire to connect the video transmitter correctly (not shown). If you are not expert with these things get help. My [...]

DJI Phantom 2 FPV mount

February 16, 2016 in 3D Printing by aaron

I wanted to install a gimbal on my Phantom. So I design a 20mm raise and un battery holder. Another advantage is to rebalance the quadricopter. Source: 20mm raiser for DJI Phantom + battery holder by 3D_CC_design

20mm raiser for DJI Phantom + battery holder by 3D_CC_design

February 16, 2016 in 3D Printing by aaron

Designed for the DJI Phantom 1 This mount allows you to separate your FPV transmitter away from your GPS module minimizing inference. Custom zip tie holes allow you to securely mount your video transmitter or OSD device. (The longer M3*8 extra screws that come with the phantom work well to [...]

DJI Phantom FPV / OSD mount by questpact

February 16, 2016 in drones by aaron

Here is a 3D printed clip on screen mount for the Phantom controller use’s a GoPro type connector to make it adjustable and can be used for other things. Source: DJI Phantom Controller Mount by markloane

DJI Phantom Controller Mount by markloane

February 16, 2016 in 3D Printing by aaron

I’ve had quite a few requests for the motorized version of the hand cranked Perseverance thing (http://www.thingiverse.com/thing:348489) , so here it is, Perseverance, Motorized. It makes a unique bookend, I receive plenty of inquiries as to where I bought it ( 😉 ). I’ve also printed one using glow in [...]

Perseverance, Motorized by gzumwalt

February 16, 2016 in 3D Printing by aaron

DIY 3D Printed Camera Slider

February 8, 2016 in 3D Printing by aaron

Claw

February 7, 2016 in Uncategorized by aaron

Extruder diagram

February 6, 2016 in 3D Printing by aaron

I was invited by a local school to participate in their Egg-Drop science event and this is one of the results. The reason they invited me was because they wanted to do something different this year. Instead of dropping boxes to protect contained eggs they wanted to drop eggs from [...]

Dropping Eggs from Drones for Fun and Science

February 5, 2016 in 3D Printing / drones by aaron

Thanks to smutboy420 for updating my design. Check out his version for a cleaner and lighter design. He used PLA plastic instead of ABS. He used a bigger servo and updated the design to fit. http://www.thingiverse.com/thing:1307204 This is a design for a Multirotor parachute system. Video: https://www.youtube.com/watch?v=d6k7jftG5uI For in depth [...]

DIY Multirotor Parachute System

February 5, 2016 in 3D Printing / drones by aaron

A small and simple 9g servo mount for mounting directly onto the extruder carriage for use with the auto bed levelling function. Mine is mounted onto a Greg’s Wade extruder body but would probably be compatible with more setups as it requires only an M4 mounting hole Source: Simple Servo [...]

Simple Servo mount

February 5, 2016 in 3D Printing by aaron

This was intended for use on a quad-rotor project, although it can be mounted on really anything. I used two Hitec HS-55 sub-micro servos and it whips the camera around without any problem. Enjoy! If you like this project, or would like to know more about 3D printing, check out [...]

Super Compact Pan Tilt Camera

February 5, 2016 in 3D Printing by aaron

This is my simple diversity receiver support. It fits on a 8mm rod. I have placed it on a old tent stick 🙂 Please hit like if you like it. Enjoy Stanley Source: FPV Diversity Receiver Support by Stanleykuenzle

FPV Diversity Receiver Support

February 5, 2016 in 3D Printing / drones by aaron

A foldable sunshield for the Samsung Galaxy Tab 4 7″ Tablet. Best results with PLA 20% infill, no support needed, cooling fan recommended. Source: Foldable sunshield for Samsung Galaxy Tab 4 7″ Tablet for DJI and other FPV by TheFlyingSentinel

Foldable sunshield for Samsung Galaxy Tab 4 7″ Tablet for ...

February 5, 2016 in 3D Printing / drones by aaron

I included 3 different versions. The first one fits the Garmin gtu 10. The other two are for the TK 102 tracker. I have not tested this with the tk 102, I made it using the measurements I found online. The reason for the different tk 102 files is that [...]

DJI Phantom 2 gps holder by GarrisonTECH

February 4, 2016 in 3D Printing / drones by aaron

Is just a protector for the cam of the quadcopter. Other designs didn’t suit my needs, so I redesigned it. I make it also parametrizable so that it can be adjusted to yours. Just edit the Open Scad source file and modify accordingly. Source: Dji Phantom 2 vision & cam [...]

Dji Phantom 2 vision & cam protector by 3dbychance

February 4, 2016 in 3D Printing / drones by aaron

Keep safe your DJI Phantom camera and gimbal! “Avoid crashes in stony lands, protect your hardware from falls. Just print this protective plate, and escape from a tragic fate.” Source: Protective plate for DJI PHANTOM by Nueve3D

Protective plate for DJI PHANTOM by Nueve3D

February 4, 2016 in 3D Printing / drones by aaron

This part allows you to mount your TS353 Tx to the side of your Phantom 2. Simply thread a zip-tie through the holes in the Tx housing and then through the air vents (you will need to remove the battery to do this) and tighten! Make sure that the bulky [...]

TS353 Transmitter (Tx) Housing / Mount / Attachment for Phantom ...

February 4, 2016 in Uncategorized by aaron

I made this for a customer to use his TS58500 mini 5.8GHz FPV video transmitter with his Phantom 2 (with Zenmuse 3D Gimbal). Note: You will need to make a wire to connect the video transmitter correctly (not shown). If you are not expert with these things get help. My [...]

DJI Phantom 2 P330Z FPV mount by geekaz01d

February 4, 2016 in 3D Printing / drones by aaron

Gimbal Protector for Phantom 2 H4-3D Source: Dji Phantom 2 H4-3D Protector by Plastikbanscher

Dji Phantom 2 H4-3D Protector by Plastikbanscher

February 4, 2016 in 3D Printing / drones by aaron