I was invited by a local school to participate in their Egg-Drop science event and this is one of the results. The reason they invited me was because they wanted to do something different this year. Instead of dropping boxes to protect contained eggs they wanted to drop eggs from [...]
Dropping Eggs from Drones for Fun and Science
Thanks to smutboy420 for updating my design. Check out his version for a cleaner and lighter design. He used PLA plastic instead of ABS. He used a bigger servo and updated the design to fit. http://www.thingiverse.com/thing:1307204 This is a design for a Multirotor parachute system. Video: https://www.youtube.com/watch?v=d6k7jftG5uI For in depth [...]
DIY Multirotor Parachute System
A small and simple 9g servo mount for mounting directly onto the extruder carriage for use with the auto bed levelling function. Mine is mounted onto a Greg’s Wade extruder body but would probably be compatible with more setups as it requires only an M4 mounting hole Source: Simple Servo [...]
Simple Servo mount
This was intended for use on a quad-rotor project, although it can be mounted on really anything. I used two Hitec HS-55 sub-micro servos and it whips the camera around without any problem. Enjoy! If you like this project, or would like to know more about 3D printing, check out [...]
Super Compact Pan Tilt Camera
This is my simple diversity receiver support. It fits on a 8mm rod. I have placed it on a old tent stick 🙂 Please hit like if you like it. Enjoy Stanley Source: FPV Diversity Receiver Support by Stanleykuenzle
FPV Diversity Receiver Support
A foldable sunshield for the Samsung Galaxy Tab 4 7″ Tablet. Best results with PLA 20% infill, no support needed, cooling fan recommended. Source: Foldable sunshield for Samsung Galaxy Tab 4 7″ Tablet for DJI and other FPV by TheFlyingSentinel
Foldable sunshield for Samsung Galaxy Tab 4 7″ Tablet for ...
I included 3 different versions. The first one fits the Garmin gtu 10. The other two are for the TK 102 tracker. I have not tested this with the tk 102, I made it using the measurements I found online. The reason for the different tk 102 files is that [...]
DJI Phantom 2 gps holder by GarrisonTECH
Is just a protector for the cam of the quadcopter. Other designs didn’t suit my needs, so I redesigned it. I make it also parametrizable so that it can be adjusted to yours. Just edit the Open Scad source file and modify accordingly. Source: Dji Phantom 2 vision & cam [...]
Dji Phantom 2 vision & cam protector by 3dbychance
Keep safe your DJI Phantom camera and gimbal! “Avoid crashes in stony lands, protect your hardware from falls. Just print this protective plate, and escape from a tragic fate.” Source: Protective plate for DJI PHANTOM by Nueve3D
Protective plate for DJI PHANTOM by Nueve3D
This part allows you to mount your TS353 Tx to the side of your Phantom 2. Simply thread a zip-tie through the holes in the Tx housing and then through the air vents (you will need to remove the battery to do this) and tighten! Make sure that the bulky [...]
TS353 Transmitter (Tx) Housing / Mount / Attachment for Phantom ...
I made this for a customer to use his TS58500 mini 5.8GHz FPV video transmitter with his Phantom 2 (with Zenmuse 3D Gimbal). Note: You will need to make a wire to connect the video transmitter correctly (not shown). If you are not expert with these things get help. My [...]
DJI Phantom 2 P330Z FPV mount by geekaz01d
Gimbal Protector for Phantom 2 H4-3D Source: Dji Phantom 2 H4-3D Protector by Plastikbanscher
Dji Phantom 2 H4-3D Protector by Plastikbanscher
[embed]https://www.youtube.com/watch?v=4JuWL1Q_IZE[/embed]
Mayday Unboxing and Setup – YouTube
Source: Printrbot Talk Forum • View topic – New Hot End Suggestions?
Printrbot Talk Forum – New Hot End Suggestions?
Source: This Old Spoon: E3D v6 Hotend on a Printrbot Simple Metal (Introduction)
E3D v6 Hotend on a Printrbot Simple Metal (Introduction)
Order Red/White/Yellow RCA To Rj45 Balun L/R A/V To Cat5 – 50-7732 online from MCM Electronics. Manufactured by mcm custom audio. MCM part number 50-7732.
RCA to ethernet adaptor
Forums http://diydrones.com/forum