A foldable sunshield for the Samsung Galaxy Tab 4 7″ Tablet. Best results with PLA 20% infill, no support needed, cooling fan recommended. Source: Foldable sunshield for Samsung Galaxy Tab 4 7″ Tablet for DJI and other FPV by TheFlyingSentinel
drones
I included 3 different versions. The first one fits the Garmin gtu 10. The other two are for the TK 102 tracker. I have not tested this with the tk 102, I made it using the measurements I found online. The reason for the different tk 102 files is that [...]
DJI Phantom 2 gps holder by GarrisonTECH
Is just a protector for the cam of the quadcopter. Other designs didn’t suit my needs, so I redesigned it. I make it also parametrizable so that it can be adjusted to yours. Just edit the Open Scad source file and modify accordingly. Source: Dji Phantom 2 vision & cam [...]
Dji Phantom 2 vision & cam protector by 3dbychance
Keep safe your DJI Phantom camera and gimbal! “Avoid crashes in stony lands, protect your hardware from falls. Just print this protective plate, and escape from a tragic fate.” Source: Protective plate for DJI PHANTOM by Nueve3D
Protective plate for DJI PHANTOM by Nueve3D
I made this for a customer to use his TS58500 mini 5.8GHz FPV video transmitter with his Phantom 2 (with Zenmuse 3D Gimbal). Note: You will need to make a wire to connect the video transmitter correctly (not shown). If you are not expert with these things get help. My [...]
DJI Phantom 2 P330Z FPV mount by geekaz01d
Gimbal Protector for Phantom 2 H4-3D Source: Dji Phantom 2 H4-3D Protector by Plastikbanscher
Dji Phantom 2 H4-3D Protector by Plastikbanscher
[embed]https://www.youtube.com/watch?v=4JuWL1Q_IZE[/embed]
Mayday Unboxing and Setup – YouTube
Forums http://diydrones.com/forum
Drone Websites
Check out DJI Phantom 2 Claw by JamesRowlands on Shapeways and discover more 3D printed products in Drone Parts / Gadgets. Source: DJI Phantom 2 Claw by JamesRowlands on Shapeways
DJI Phantom 2 Claw
FPV with your Phone! – EasyCAP: FPV With Your Phone! – LaserBGC Android Boscam Monitor FPV setup
Use Your Phone to FPV and DVR!
1 This H3-3D FPV setup guide breaks the process down into three steps. Feel free to skip to the appropriate step for your build. Source: Phantom 2 + H3-3D FPV Setup Guide Part 1 – RC Geeks Blog
Phantom 2 + H3-3D FPV Setup Guide
Mayday Unboxing and Setup – YouTube Posted in drones | Comments Off on Mayday Unboxing and Setup – YouTube DJI Phantom 2 Claw Check out DJI Phantom 2 Claw by JamesRowlands on Shapeways and discover more 3D printed products in Drone Parts / Gadgets. Source: DJI Phantom 2 Claw by [...]
